BOSS METAL AND PLASTIC CO.LTD
Wire Mesh Fencing Manufacturer
Add to Cart
The Crowd Control Interlocking Barrier is also called a steel barrier, which is made of galvanized steel,
with size 2.0 x 1.1m, 2.2x1.1m, 2.3 x 1.1m, 2.5 x 1.1m, 2.6 x 1.1m. The barricades are linked
together to provide a solid barrier to direct pedestrian traffic. It is easily and quickly installed
between pedestrian traffic and possible danger to provide safety, especially Children.
| Item | 1.0-Meter | 2.0-Meter | 2.3-Meter | 2.5-Meter | 2.6-Meter |
| Length | 39" (3.25 Ft.) | 79" (6.5 Ft.) | 7.5’ (2.3 m) | 98" (8 Ft.) | 8 ft 6 in (2.6m) |
| Height | 43" (3.6 Ft.) | 43" (3.6 Ft.) | 43” (109.2 mm) | 43" (3.6 Ft.) | 43" (109.2mm) |
| No. of Uprights | 6 | 14 | 16 | 18 | 22 |
| Spacing Between Uprights | 4 3/8" | 4 3/8" | 4 3/8" | 4 3/8" | 4 3/8" |
| Frame Thickness | 16 gauge | 16 gauge | OD 14-gauge | 16 gauge | OD 14-gauge |
| Frame Dia. | 1.5" | 1.5 in. OD 16-gauge or 1/25 in. OD | 1.5 in. OD 16-gauge or 1/25 in. OD | 1.5" | 1.5 in. OD 16-gauge or 1/25 in. OD |
| Upright Dia. | .625" | .625" | .625" | .625" | .625" |
1) 6.79' x 2.72' Suits Frame with a flexible supporting leg
2) 6.82' x 3.18' Suits Frame with a fixed supporting leg
3) 6.82' x 3.44' Suits Frame with a Plate base
4) 102"L x 40"H overall size
The mainframe is made of 1½ ” O.D. galvanized steel tubing, minimum 16 gauge. It is a single tubing
which is bent at right angles. Then the bent tubing is welded in saddle-cut welds with bottom horizontal tubing.
Equally-spaced bars are welded strongly with barrier frame, made of 1.5’’ O.D. steel tubing,
minimum 16 gauge. Minimum of ½” weld at the top and the bottom of each upright bar.
The spacing between inside vertical members is no less than 4 3/8’’ and meets all standards.
3. Crowd Control Interlocking Barrier Base Options
There are several barrier base options available with the bridge base and flat base being the most popular by far.
Feet: Two (2) bolt-on flat feet ½” x 2″ flat steel bar with 1¼” O.D. 14 galvanized stem, or
Two (2) bolt-on bridge feet 1½” O.D. galvanized steel, 16 gauge, with ¼” O.D. galvanized stem.
Our barriers go through a hot-dip galvanizing process so that our barriers remain rust-free.
FLAT BASE, U BASE, Bridge Base, Wheel Base
The crowd control barriers are connected by interlocking device, called Male-Female interlocking ends.
It is a minimum ⅝” diameter rod welded through the mainframe at both ends. Male/Female connections
have enough clearance to allow for uneven ground when connected.
The whole panel is hot dipped galvanized after welding as per the specs and drawing.
The barrier is polished after galvanizing so that no burrs sharp points to hurt the workers.
Parade Routes
Fun Runs/Walks
Event Staging Areas
Concert Stages
Block Parties
Waiting Lines
Grand Openings
Parking Lots
Construction Sites
Carnivals/Fairs